Helmholz 700-158-3PN01 PN/PN Coupler V1

Helmholz 700-158-3PN01 PN/PN Coupler V1

الكود: 700-158-3PN01
العلامة التجارية: Helmholz

With the PN/PN Coupler, a simple and uncomplicated connection of two separate PROFINET networks is possible. The PN/PN Coupler enables data transmission between two PROFINET controllers. A PROFINET IO device is on both PROFINET network sides. Received input data on one of the network sides is made available as output data to the other network side. The IO data transfer takes place live and as quickly as possible without additional handling blocks.

The maximum size of the transmitted IO data is 1024 bytes. Up to 16 slots for IO modules of 1 byte and up to 128 bytes are available. The incorporation into the PLC engineering tool is made possible by a GSDML file; special configuration software isn’t necessary.

General information
Order number700-158-3PN01
Article namePN/PN Coupler V1
Scope of deliveryPN/PN Coupler, Quick Start Guide and CD with GSDML file
Dimensions (DxWxH)35 x 58 x 72 mm
WeightApprox. 135 g
PROFINET interface
Number2 with 2 ports each
ProtocolPROFINET IO Device as defined in IEC 61158-6-10
Physical layerEthernet
Transmission rate100 Mbps full duplex
I/O image sizemax. 1024 bytes
Connection4x RJ45
integrated switchYes
FeaturesMedia redundancy (MRP client), automatic addressing, topology detection (LLDP, DCP), diagnosis alarms, conformance class B
Voltage supply
Voltage supply24 V DC (18 - 28 V DC)
Current drawmax. 210 mA
Ambient conditions
Ambient temperature0 °C to 60 °C
Transport and storage temperature-20 °C to 80 °C
Protection ratingIP 20
CertificationsCE
CE
RoHSYes
REACHYes

Helmholz ورقات البيانات

البلد واللغة اسم الملف رابط التحميل
United States (English) Helmholz-EN_42334.pdf تحميل

طلب عرض سعر