الكود: ZLSE
العلامة التجارية: Zander Aachen
Rope safety switches immediately switch off the machine drive in the event of a rope pull or rope break. This state remains locked until the reset button is pressed with the rope correctly tensioned.
There are different variants for different rope lengths. An additional emergency stop button can be mounted on both sides of the switch.
With the ZANDER assembly / rope tensioning system ZTK, the pre-tensioning of the rope can be easily set so that green arrows are visible in the display window of the rope pull switch. This considerably simplifies assembly, troubleshooting and maintenance.
More stainless steel safety switches can be found in the "Coded stainless steel safety switches" section.
ZLSE
Possible applications Protection of extensive systems, especially in the food and chemical industries
Certified according to IEC 60947-5-5, IEC 60947-5-1, EN 60947-5-5, EN 60947-5-1,
EN 60204-1, ISO 13850
Approvals CE, TÜV
Number of positive opening / closing contacts 3/1
Switching capacity, minimum load current AC-15: 3 A / 240 V; DC 5 V / 10 mA
Operating force rope pulled <125 N
Max. Rope length 100 m
Temp. Range -25 ° C to +80 ° C
LED DC 24 V
flashing red - unsafe condition
Green steady light - safe condition
Stainless steel housing / cover
Degree of protection IP67
Mechanical life 1.5 x 10⁶ switching cycles
Weight 1020 g
طلب عرض سعر