Helmholz 600-253-4AD01 AI 2/4x R, RTD, 16 bit, 2/3/4 wire Module

Code: 600-253-4AD01

Marke: Helmholz

General information
	Order number	600-253-4AD01
	Article name	AI 2/4x R, RTD, 16 bit, 2/3/4 wire
	Scope of delivery	AI 2/4x R, RTD, 16 bit, 2/3/4 wire
	Dimensions (DxWxH)	110 x 14 x 73 mm
	Weight	Approx. 70 g
Number of inputs		2/4
Electrical isolation
	from the backplane bus	Yes
	Between the channels	No
Internal		Max. 140 mA
Power dissipation		Max. 1 W
Measuring ranges		150 ohms, 300 ohms, 600 ohms, 3000 ohms, 6000 ohms, PT100, PT1000, Ni100, Ni1000, LGNi1000
Measuring method		Integration
Measurement resolution		15 bits + sign
Interference frequency suppression		None \| 10 Hz \| 50 Hz \| 60 Hz \| 400 Hz
Refresh rate / conversion rate		Number of active channels x conversion time +16 ms for wire break detection for each channel when activated. The conversion time will depend on the interference frequency suppression: None: 8 ms 400 Hz: 45 ms 60 Hz: 109 ms 50 Hz: 128 ms 10 Hz: 342 ms
Diagnoses		Upper measuring range limit exceeded (overflow), lower measuring range limit fallen below (underflow), wire break, parameter assignment error
Process alarms		Upper and lower limit per channel
Error limits
	Operational error limit in the entire temperature range	±0.5 % relative to the nominal range
	Basic error limit at 25 °C	±0.3 % relative to the nominal range
	Temperature error	±0.005 %/K relative to the nominal range
	Linearity error	±0.05 %/K relative to the nominal range
	Repeating accuracy in steady state at 25 °C	±0.05 %/K relative to the nominal range
Parameter configuration length		26 bytes
General error indicator		Red LED
Hot-swap capable		Yes
Ambient conditions
	Ambient temperature	0 °C … +60 °C
	Transport and storage temperature	-20 °C … +80 °C
	Relative air humidity	95 % r H without condensation
	Protection rating	IP 20
	Certifications	CE, UL
UL
	Surrounding Air Temperature	0 °C … +60°C
	Pollution degree	2
CE
	Noise immunity	DIN EN 61000-6-2 “EMC Immunity”
	Interference emission	DIN EN 61000-6-4 “EMC Emission”
	Vibration and shock resistance	DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
	RoHS	Yes
	REACH	Yes