Helmholz 700-600-CAN12 CAN 300 PRO, USB programming cable

The CAN 300 PRO module, for use in an S7-300* from Siemens, enables connection of CAN participants with the automation device.

The module can be plugged into either the central frame or the expansion frame. It supports CAN 2.0A (11 bit) and CAN 2.0B (29 bit) frames with a freely selectable transfer rate from 10 kbps to 1 Mbps.
The CAN 300 PRO can send and receive CAN telegrams in Layer 2 mode. In the CANopen master mode, the data of the CANopen slaves can be processed as a process image table in the PLC.
Use as a CANopen slave is also possible. For standard applications, such as motor control with CANopen, application examples are available. In addition, handling blocks for the SAE J1939 protocol are available.
There are 16 freely settable timers available in the CAN 300 PRO. Each timer can trigger a freely programmable CAN telegram. This means the synchronous protocols widely available in drive and servo control are easy to implement using the CAN 300 PRO.
A DIP switch for setting the transfer rate and station address facilitates commissioning. An optional Micro memory card stores the project. In this way, replacement of the parameterization or the module during servicing can be carried out quickly.
6 LEDs indicate the operating status of the module. There is a USB interface for diagnostics and parameterization.
The CAN 300 PRO also works in the extended ambient temperatures of -25 °C to +60 °C.
A USB programming cable is included in the delivery.

• Layer 2, 11 bit and 29 bit (CAN 2.0A/B)
• CANopen® master on the module
• DIP switches for address + transfer rate
• Memory card for project backup (optional)
• USB interface for parameterization and diagnostics
• Extensive CAN bus diagnostics possibilities
• Can also be used as CANopen® slave
• Extended ambient temperature

• General information
  	Order number	700-600-CAN12
  	Article name	CAN 300 PRO
  	Scope of delivery	CAN 300 PRO, USB programming cable
  	Dimensions (DxWxH)	116 x 40 x 125 mm
  	Weight	Approx. 280 g
  CAN interface
  	Number	1
  	Type	ISO/DIN 11898-2 CAN High-speed physical layer
  	Transmission rate	10 kbps ... 1 Mbps
  	Protocol	CAN 2.0A (11 bit)/CAN 2.0B (29 bit) Layer 2 CANopen® Master/CANopen® slave SAE J1939 DeviceNet slave (upon request)
  	Connection	Connector, SUB-D, 9-pin
  Status indicator		6 LEDs
  Configuration interface
  	Type	USB 1.1
  	Connection	USB B socket
  Voltage supply		+5 V DC via backplane bus
  Current draw
  	Current draw typical	160 mA
  	Current draw maximal	190 mA
  Ambient conditions
  	Ambient temperature	-25 °C … +60°C
  	Transport and storage temperature	-25 °C … +75 °C
  	Pollution degree	2
  	Protection rating	IP20
  	Certifications	CE
  CE
  	RoHS	Yes
  	REACH	Yes