Serie 420XXXX

Serie 420XXXX

Code: Serie 420XXXX
Marke: Nortek

Characteristics

  • An outer helical wrap for elements with fiberglass non-woven fabric, tightly bonds each ply to achieve uniform and rigid ply spacing. This minimizes pleat flexing and possible filter element damage offering flow protection, also under severe cold start or pressure overload conditions, providing reliable performance.
  • The plastic structure of the ends incorporates flow channels facilitating the circulation of the oil, thus minimizing the effects of pressure drop and maintenance costs by increasing the fatigue cycles of the element. A bypass valve integrated in the filter protects the element when a certain differential pressure is exceeded.
  • Choosing the right filter media depends on the type of application. For hydraulic applications, fiberglass, polyester, cellulose, metal fiber and stainless steel mesh media are used.
    • Non-woven fiberglass fabric.- They have a high dirt absorption capacity and an excellent degree of separation (3-25µm) thanks to their labyrinthine structure.
    • Polyester fleece.- 100% polyester fiber filter material with thermal bonding that offers high resistance to pressure differences, has a high dirt absorption capacity and an excellent degree of separation (3-25µm) with low passage resistance, good chemical and wear resistance.
    • Filtering paper.- Cellulose fiber filtering material with special impregnation, it is an economic variant with a good absorption capacity and a degree of separation (10-50µm). It is not suitable for aqueous media.
    • Stainless steel non-woven fabric.- Filtering material made up of sintered metal fibers with a labyrinthine structure for depth filtration, they have a high dirt absorption capacity and an excellent degree of separation (3-25µm) with a low passage resistance, good chemical and thermal resistance.
    • Fine steel cloth.- Filtering material made up of metal mesh fabric (square or braid) in 1.4301 or 1.4305 steel for surface filtration, offering low flow resistance and a degree of separation (10-1000µm), and excellent chemical and thermal resistance.
  • The sealing of the O-ring configurable in different materials (NBR, EPDM, Teflon) according to the applications, together with the resistance of the end caps as part of the filter housing, make up this competitive element, reducing disposal and maintenance costs.

Description

Nortek filters incorporate state-of-the-art design technology, which through a pleated support system and the arrangement of the elements that compose it in the structure, achieve unbeatable strength, performance and useful life.

Design and principle of operation

Both the design and the composition of the elements are designed to facilitate the circulation of the oil through the filter, minimizing pressure losses and retaining contaminants as they pass through the filter elements according to the degree of filtration that is desired (Beta Ratio “β”: The number of particles entering the filter, divided by the number of particles leaving the filter).

The effectiveness of the filter element in contaminant control depends on its design and its sensitivity to any unstable operating conditions, which may stress and damage the filter element.

Installation

In the installation of these filtering elements, the type of process must be taken into account, in order to adapt said element according to the needs and in the most efficient way possible.

Applications

  • Nortek 420XXXX series filters are suitable for hydraulic systems, mechanism lubrication and fluid control, they are return filters that are installed in the oil tank and filter the hydraulic oil before it returns to the oil tank. This guarantees that the dirt that appears on the components does not reach the tank, they work under conditions of low pressure and temperature and their action allows preserving the useful life of both the equipment components and the hydraulic fluid.

Specifications

Specifications
load loss (see graphs of characteristic flow curves)
collapse pressure 10…25 bar (145…362 psi), according to ISO 2941 ( ANSI B93.25 )
fluid compatibility Petroleum derivatives, refrigerants, oil-in-water emulsions.

According to ISO 2943 standard (ANSI B93.23)

End Cap Load Resistor According to ISO 3723 standard
fatigue resistance According to ISO 3724 standard (ANSI B93.24)
Temperature range 0 – 107oC ( 0 – 225oF ) for most hydraulic fluids
0 – 65ºC (0 – 150ºF) for soft drinks
0 – 93ºC (0 – 200ºF) for petroleum derivatives
nozzle diameter 60mm ÷ 143mm ( 2,36” ÷ 5,63” )
Multi-pass performance test According to ISO 16889 standard
Bubble method test According to ISO 2942 standard
Flow characteristic curves According to ISO 3968 standard
together NBR – EPDM – Teflon

Order information

Specifications Reference
cartridge model 420 A B C D
According to size – A (see table in Dimensional drawing)
07
09
13
16
20
25
30
60
According to filtration – B Micron
3 one
5 2
10 3
20 4
25 5
50 6
one hundred 7
200 8
40 9
60 0
80 1A
According to material – C Type
fiberglass for oil one
fiber for water 2
Fiber for oil and water 3
Poplar Ø 114mm 4
stainless mesh 5
stainless fiber 6
Papel Ø 95,5mm 7
Depending on seal material – D Material
NBR one
EPDM 2
TEFLON 3
42013341 Cartridge size 13 Filtration 100 micron Made of paper Ø 114mm NBR gaskets

Fordern Sie ein Angebot an

Verwandte Produkte