Helmholz 700-650-CAN01 DP/CAN coupler CANopen® Layer 2

Code: 700-650-CAN01

Brand: Helmholz

On the PROFIBUS-DP, the DP/CAN coupler is a normal participant.
The I/O data of the CANopen® participants is shown in the PROFIBUS in a transparent and freely configurable manner.
The DP/CAN coupler is integrated in the hardware configurator with a GSD file and can be completely configured there. Additional tools are not necessary.

On PROFIBUS, all standard transfer rates up to 12 Mbps are supported; on the CAN bus up to 1 Mbps.
The PROFIBUS address is set using a DIP switch.
Parameterization of the CANopen participants using SDO frames and administration of emergency messages is also possible.
Alternatively, the DP/CAN coupler can also be used as a CAN Layer 2 device on the CAN bus. This makes it possible to also integrate customer-specific CAN protocols via PROFIBUS.

eneral information
	Order number	700-650-CAN01
	Article name	DP/CAN coupler CANopen® Layer 2
	Scope of delivery	DP/CAN coupler, manual, CD with software
	Dimensions (DxWxH)	114 x 18 x 108 mm
	Weight	Approx. 110 g
PROFIBUS interface
	Number	2
	Protocol	max. 12 Mbps, autom. detection
	Transmission rate	PROFIBUS-DP
	I/O image size	max. 240 bytes of input / 240 bytes of output data
	Connection	SUB-D female connector, 9-pin
CAN interface
	Number	1
	Type	ISO/DIN 11898-2 CAN High-speed physical layer
	Transmission rate	10 kbps ... 1 Mbps
	Protocol	CANopen® master CAN 2.0A (11 bit)
	Connection	Terminal 3-pin
	TPDOs	4
	RPDOs	4
	Features	Sync timer
Status indicator		3 LEDs
Voltage supply		24 V DC, 18–30 V DC
Current draw		typ. 180 mA with DC 24 V
Ambient conditions
	Ambient temperature	-25 °C ... +70°C
	Transport and storage temperature	-40 °C … +75 °C
	Relative air humidity	95 % r H without condensation
	Pollution degree	2
	Protection rating	IP20
	Certifications	CE
CE
	RoHS	Yes
	REACH	Yes