PN/CAN gateway PROFINET/CANopen Master incl. Quick Start Guide CD with GSDML file and manual

Code: 700-672-PNC01

Brand: Helmholz

IPN/CANopen, PN/CANopen Slave, PN/CAN Layer 2

With the PN/CAN gateway, the connection of CAN devices to PROFINET is easy and straightforward.
The product spectrum encompasses versions for CANopen® master, CANopen Slave or Layer 2 protocols.
The I/O data of the CAN participants is transparently displayed in a freely configurable manner on the PROFINET network and can thus be processed directly in the PLC.
The PN/CAN gateway is integrated with a GSDML file in the hardware configurator and can be fully configured there. Other software tools for configuration or handling blocks for programming are not required.
– CANopen master, CANopen Slave, or CAN Layer 2 protocols
– Up to 127 CANopen slaves possible
– SDO communication, emergency messages, participant monitoring with heartbeat and node guarding
– Up to 512 CAN messages can be confi gured (Layer 2)
– SAE J1939 protocol (Layer 2)
– CANopen Slave profi le 402, or customized
– Easy confi guration using a GSDML fi le; no handling blocks or
confi guration software necessary
– Can be used with all PROFINET-compatible projecting tools