DIALOCK® diaphragm valve with flanged monolithic body, drilled ANSI B16.5 cl. 150 #FF
DIALOCK® 2-WAY DIAPHRAGM VALVE
• Connection system for solvent weld, threaded and flanged joints
• Optimised fluid dynamic design: maximum output flow rate thanks to the
optimised efficiency of the fluid dynamics that characterise the new internal
geometry of the body
• Internal components in metal, totally isolated from the fluid and external
environment
• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet
sizes for 7 different valve sizes
• Non-rising handwheel that stays at the same height during rotation,
equipped with a graduated optical indicator protected by a transparent
PVC cap with seal O-Ring
• Bonnet fastening screws in stainless steel protected against the external
environment by PE plugs. Absence of metal parts exposed to the external
environment to prevent any risk of corrosion.
• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the
uniform distribution of shutter pressure on the diaphragm seal, offers the
following advantages:
? reduction in the tightening torque of the screws fixing the actuator to
the valve body
? reduced mechanical stress on all valve components (actuator, body and
diaphragm)
? easy to clean valve interior
? low risk of the accumulation of deposits, contamination or damage to
the diaphragm due to crystallisation
? operating torque reduction
EPDM code
|
FKM code
|
PTFE code
|
DKOAV012E
|
DKOAV012F
|
DKOAV012P
|
DKOAV034E
|
DKOAV034F
|
DKOAV034P
|
DKOAV100E
|
DKOAV100F
|
DKOAV100P
|
DKOAV114E
|
DKOAV114F
|
DKOAV114P
|
DKOAV112E
|
DKOAV112F
|
DKOAV112P
|
DKOAV200E
|
DKOAV200F
|
DKOAV200P
|
DKOAV212E
|
DKOAV212F
|
DKOAV212P
|
Request a Quote