Helmholz 700-600-CAN12 CAN 300 PRO, USB programming cable

Code: 700-600-CAN12

Brand: Helmholz

The CAN 300 PRO module, for use in an S7-300* from Siemens, enables connection of CAN participants with the automation device.

The module can be plugged into either the central frame or the expansion frame. It supports CAN 2.0A (11 bit) and CAN 2.0B (29 bit) frames with a freely selectable transfer rate from 10 kbps to 1 Mbps.
The CAN 300 PRO can send and receive CAN telegrams in Layer 2 mode. In the CANopen master mode, the data of the CANopen slaves can be processed as a process image table in the PLC.
Use as a CANopen slave is also possible. For standard applications, such as motor control with CANopen, application examples are available. In addition, handling blocks for the SAE J1939 protocol are available.
There are 16 freely settable timers available in the CAN 300 PRO. Each timer can trigger a freely programmable CAN telegram. This means the synchronous protocols widely available in drive and servo control are easy to implement using the CAN 300 PRO.
A DIP switch for setting the transfer rate and station address facilitates commissioning. An optional Micro memory card stores the project. In this way, replacement of the parameterization or the module during servicing can be carried out quickly.
6 LEDs indicate the operating status of the module. There is a USB interface for diagnostics and parameterization.
The CAN 300 PRO also works in the extended ambient temperatures of -25 °C to +60 °C.
A USB programming cable is included in the delivery.

Layer 2, 11 bit and 29 bit (CAN 2.0A/B)
CANopen® master on the module
DIP switches for address + transfer rate
Memory card for project backup (optional)
USB interface for parameterization and diagnostics
Extensive CAN bus diagnostics possibilities
Can also be used as CANopen® slave
Extended ambient temperature

General information
	Order number	700-600-CAN12
	Article name	CAN 300 PRO
	Scope of delivery	CAN 300 PRO, USB programming cable
	Dimensions (DxWxH)	116 x 40 x 125 mm
	Weight	Approx. 280 g
CAN interface
	Number	1
	Type	ISO/DIN 11898-2 CAN High-speed physical layer
	Transmission rate	10 kbps ... 1 Mbps
	Protocol	CAN 2.0A (11 bit)/CAN 2.0B (29 bit) Layer 2 CANopen® Master/CANopen® slave SAE J1939 DeviceNet slave (upon request)
	Connection	Connector, SUB-D, 9-pin
Status indicator		6 LEDs
Configuration interface
	Type	USB 1.1
	Connection	USB B socket
Voltage supply		+5 V DC via backplane bus
Current draw
	Current draw typical	160 mA
	Current draw maximal	190 mA
Ambient conditions
	Ambient temperature	-25 °C … +60°C
	Transport and storage temperature	-25 °C … +75 °C
	Pollution degree	2
	Protection rating	IP20
	Certifications	CE
CE
	RoHS	Yes
	REACH	Yes