Serie 41146XX

Serie 41146XX

Code: Serie 41146XX
Brand: Nortek

Characteristics

  • Great lubrication precision.
  • Ease of assembly.
  • Simplicity in installation.

Description

These flow dividers patented as "Divinor" by Nortek have the mission of distributing the oil air through various lubrication points without using mechanical means.

Although they can be used in any type of industry, they have been developed for steel applications, especially in rolling mill chocks.

Design and principle of operation

The flow enters the interior of the Divinor through the inlet (A), colliding with the internal divider (1) which is responsible for distributing the flow through both outlets based on the holes made in both outlets. Due to its fluted profile developed by Nortek, the division is done accurately through both outlets (B and C).

Installation

It is made by means of a longitudinal hole of Ø15 H11 recommended by Nortek made in the chock in an area free of obstacles with both sides of the chock threaded at 3/8”bsp as standard and some feeding holes towards the bearing and seals. In the longitudinal hole, a plug is placed on one side and a ¼”bsp Nortek entry system on the other. Internally, as many Diviners will be placed as necessary, placing some intermediate extensions as needed. The feeding holes are clogged on the outside.

Specifications

Material EN 12164 – CuZn39Pb3
Weight 0,2 kg

Order information

Specifications Reference
Inlet system 3/8” bsp air oil + filtered and diaphragm (axial bearing outlet) 4407615L
Inlet system 3/8” bsp air oil + filtered and diaphragm 4407616L
Tightening cap 3/8” bsp reduced L-7 4407709L
Direct locking plug 3/8” bsp 5060140
Divinor extension Ø15 closing 2 sides 4407502L-XXX
Divinor extension Ø15 closing 1 side 4407503L-XXX
Divinor extension Ø15 side outlet 4407504L-XXXXXXX

Request a Quote

Related Products