DM double line modular dispenser

DM double line modular dispenser

Código: 328204X Series
Marca: Nortek

Characteristics

  • Change of turrets without the need to disassemble the installation
  • Combination of different volumes in the same block
  • Grease and oil can be used
  • high performance
  • Armored turret option
  • Possibility of different turrets for visual or electrical operation control by micro or proximity detector.
  • Robust body in different steels
  • Zinc finish ISO 2081 – Fe/Zn12/A
  • adjustable flow
  • Caps available in methacrylate, nylon or aluminum

Description

The dosers are lubrication elements designed for two simultaneous supply lines, one of them pressurized while the other is depressurized, alternating the lubrication cycles thus dosing an adjustable amount of lubricant in each cycle.

Design and principle of operation

Each doser is made up of a 3282X4X.000 base plate and a 32830XX.000 dosing block. Its design offers the advantage of replacing individual dosing groups without having to disassemble the entire system or the pipe connections, as well as being able to use different independent flow rates in each of them.

The base plate manages the entrance of the lubricant, we have the possibility of entering the dosing block or joining outlets to double the flow if necessary.

Each dosing block is made up of a servo piston (A) and a servo (B). The movements of the piston illustrated in fig. 1 shows the operation of the dispenser alternating the feeding of the lubricant when it enters through line 1 or when it enters through line 2.

The supply is made with the two separate outputs, but there is the possibility of internal communication of the outputs, unifying in a single output, thus doubling the flow. Being internal communication, we offer the advantage of avoiding fittings and external piping, thus favoring a clean installation.

Specifications

Stainless steel up to 4cm 3 Carbon steel up to 40cm 3
number of outputs From 2 to 12 outputs (according to reference) From 2 to 12 outputs (according to reference)
Outlet flow per injection 1, 2 or 4 cm3 (Max. adjustable) 1, 2, 4, 6, 8, 16 or 40 cm3 (Max. adjustable)
minimum working pressure 10 bar 10 bar
Maximun working pressure 250 bar 250 bar
input connections G3/8 G3/8
output connections G1/8 G1/4
Material Inox. – (Aisi 304), (Aisi 316) or (Aisi 316 Ti) Aº Cº – EN 10087-11SMnPb30

Order information

The standard supply is a normal turret with methacrylate cap, NBR gaskets. Bodies in EN 10087-11SMnPb30 with zinc plating according to ISO 2081 – Fe/Zn12/A. You have to choose the base plate and the dosage groups:

DOSAGE GROUP: ADD LETTER ACCORDING TO ASSEMBLY
GD- XX
dosage group
Dosage group 1 cm³ 01
Dosage group 2 cm³ 02
Dosage group 4 cm³ 04
Dosage group 6 cm³ (*) 06
Dosage group 8 cm³ (*) 08
Dosage group 16 cm³ (*) 16
Dosage group 40 cm³ (*) 40

(*) Only available in carbon steel

Solicitar una Cotización

Productos Relacionados