Código: 700-770-8MD41
Marca: Helmholz
The SSW7-TS PRO enables remote maintenance of an S7 system over a modem connection and supports connecting to an MPI or PROFIBUS network with up to 12 Mbps on the system side.
An analog modem is integrated in the housing of the SSW7-TS PRO. The analog modem can be configured for use worldwide. In addition to use as a remote maintenance solution, the SSW7-TS PRO can also be used as a PC adapter on-site with its RS232 or USB interface. Due to the integrated repeater, the MPI/PROFIBUS connecting cable of the SSW7-TS PRO is not a stub. This means the adapter can be plugged at any point along the bus even at 12 Mbps.
Power is supplied to the SSW7-TS PRO through the MPI/PROFIBUS connecting cable or on demand via the external voltage connection
General information |
---|
| Order number | 700-770-8MD41 |
---|
| Article name | SSW7-TS PRO, MPI/PROFIBUS adapter with modem analog |
---|
| Scope of delivery | SSW7-TS PRO, DIN rail adapter, 2 x telephone cable RJ11 + TAE, 3 m each, 3 m programming cable, USB cable, manual, CD with software |
---|
| Dimensions (DxWxH) | 130 x 67 x 30 mm |
---|
| Weight | approx. 240 g |
---|
Supply voltage | 24 V DC, 18...30 V |
---|
Current draw | approx. 130 mA |
---|
MPI interface |
---|
| Type | RS485 |
---|
| Transmission rate | 9,6 kbps...12 Mbps |
---|
| Connection | SUB-D, 9-pin with PG interface and terminating resistor |
---|
Communication interface |
---|
| Number | 1 |
---|
| Type | RS232; 2-wire dial-up line; USB |
---|
| Transmission rate | 9,6...115,2 kbps |
---|
| Transmission type | Asynchronous serial / USB |
---|
| Protocol | PC <-> S7 via Modem or local |
---|
| Connection | Connector, SUB-D, 9-pin; RJ11; Mini-USB connector |
---|
Protection rating | IP 20 |
---|
Solicitar una Cotización