Zander Aachen ZCode-LCE Coded Stainless Steel Safety Switch

Zander Aachen ZCode-LCE Coded Stainless Steel Safety Switch

Código: ZCode-LCE
Marca: Zander Aachen

rate contactlessly via a coded magnet system with a large switching distance and a large tolerance towards offset on the protective door. Activation can only be carried out with the actuator included in the scope of delivery. The switching status is indicated by an LED.


They are completely dust and water protected (IP 69K). The difference lies in different housing designs. Type ZCode-LCE has, for example, a stainless steel housing for increased temperature requirements or when high chemical resistance to environmental influences is required.




ZCode-LCE

Applications Can also be used on poorly aligned protective doors, sliding protection grilles or protective covers

Certified according to ISO 13849-1; EN 62061, EN ISO 14119; EN 60204-1; EN 60947-5-3; according to UL508

Approvals CE, TÜV, UL

24 V DC power supply; +/- 15%, max. 50 mA

Number of semiconductor outputs 2 contactless safety outputs, 1 signaling output

Switching capacity (safe & signal outputs) DC 24 V; Max. 200 mA; short-circuit proof

Minimum load current DC 24 V; 1 mA

Sensing range recommended, maximum. 5 mm, close 10 mm / open 22 mm

Housing material stainless steel 316

Degree of protection IP67, IP69K (with M12 connector IP67)

Temperature range -25 ° C to +105 ° C

PL; Kat .; SILCL (EN ISO 13849-1; EN / IEC 62061) PL e; Cat.4

Vibration, shock resistance 10-55 Hz / 1 mm, 1 ms / 30 g

Weight, dimensions 200 g, 88 x 25 x 13 mm

Zander Aachen

United States (English) Zander-Aachen-EN_42085.pdf

Solicitar una Cotización