3117XX3XX series

3117XX3XX series

Code: 3117XX3XX series
Marque: Nortek

Applications

  • This type of decompression dispensers are suitable for installations with light oils and for applications in bearings at high speeds.

Characteristics

  • Body material EN 573-3 – AW-Al Cu4PbMg
  • Block design avoiding leaks.
  • high performance
  • From 3 to 6 outputs
  • adjustable air flow
Max air service pressure 10 bar
Min. air operating pressure Outlet pressure + 1 bar
Max oil service pressure 45 bar
Min. oil service pressure Outlet pressure + 20 bar
oil discharge pressure < 1.2 bar
Fluent Mineral oil
Goo Up to 3000cSt. according to temperature
Temperature range -20ºC. / +80ºC.
Up to 5ºC. can be used max. oil viscosity ISO VG 100
air inlet 1/4”bsp
oil inlet 1/4”bsp
Departures 1/8”bsp

Description

These dispensers are lubrication elements specially designed for single-line air-oil systems.

Facility

There are two types of installation possibilities for this dispenser.

  1. Parallel installation

This is the most common installation, the dispensers are connected independently to the main lines. It is necessary to take into account the air purge in this installation, it is necessary to drill the air closing cap to be able to purge and thus avoid the malfunction of the lubrication.

2. Series installation

It is not a usual installation but it is possible to do it depending on the installed dispensers and the space where to locate the installation.

Order information

The standard supply corresponds to the dispenser with 6 outlets.

The reference is formed depending on the number of outputs and their position. Depending on the volume required at the outlet (doser volume), we will give the last digit to the doser, as shown in the following table.

LETTER TO ADD ACCORDING TO THE VOLUME OF THE DISPENSER
3117 XX 3 X X
number of outputs
02
04
06
08
10
outputs position
Superior 0
rear 2
Output volume (cm³)
0.022A
0.034B
0.057C
0.110D

Order example Reference

6 outlet distributor with:
upper exits
With an outlet volume of 0.110 cm³

31170630D

Demande de devis

Produits connexes