Helmholz 700-770-8MD41 SSW7-TS PRO, MPI/PROFIBUS-Adapter mit Modem analog, inkl. Hutschienenadapter

Code: 700-770-8MD41

Marque: Helmholz

The SSW7-TS PRO enables remote maintenance of an S7 system over a modem connection and supports connecting to an MPI or PROFIBUS network with up to 12 Mbps on the system side.

An analog modem is integrated in the housing of the SSW7-TS PRO. The analog modem can be configured for use worldwide. In addition to use as a remote maintenance solution, the SSW7-TS PRO can also be used as a PC adapter on-site with its RS232 or USB interface. Due to the integrated repeater, the MPI/PROFIBUS connecting cable of the SSW7-TS PRO is not a stub. This means the adapter can be plugged at any point along the bus even at 12 Mbps.
Power is supplied to the SSW7-TS PRO through the MPI/PROFIBUS connecting cable or on demand via the external voltage connection

General information
	Order number	700-770-8MD41
	Article name	SSW7-TS PRO, MPI/PROFIBUS adapter with modem analog
	Scope of delivery	SSW7-TS PRO, DIN rail adapter, 2 x telephone cable RJ11 + TAE, 3 m each, 3 m programming cable, USB cable, manual, CD with software
	Dimensions (DxWxH)	130 x 67 x 30 mm
	Weight	approx. 240 g
Supply voltage		24 V DC, 18...30 V
Current draw		approx. 130 mA
MPI interface
	Type	RS485
	Transmission rate	9,6 kbps...12 Mbps
	Connection	SUB-D, 9-pin with PG interface and terminating resistor
Communication interface
	Number	1
	Type	RS232; 2-wire dial-up line; USB
	Transmission rate	9,6...115,2 kbps
	Transmission type	Asynchronous serial / USB
	Protocol	PC <-> S7 via Modem or local
	Connection	Connector, SUB-D, 9-pin; RJ11; Mini-USB connector
Protection rating		IP 20