Zander Aachen ZCode-TC Coded Safety Switch

All safety switches of the ZCode series operate contactlessly via a coded magnet system with a large switching distance and a large tolerance towards offset on the protective door. Activation can only be carried out with the actuator included in the scope of delivery. The switching status is indicated by an LED.

They are completely dust and water protected (IP 67). The difference lies in different housing designs. Type ZCode-MC has, for example, a stainless steel housing for increased temperature requirements or when high chemical resistance to environmental influences is required.

ZCode-TC

Certified according to ISO 13849-1; EN 62061, EN ISO 14119; EN 60204-1; EN 60947-5-3; according to UL508

Approvals CE, TÜV, UL

Possible applications Ideal sensor for use in restricted spaces

24 V DC power supply; +/- 10%

Number of semiconductor outputs 2 contactless safety outputs, 1 signaling output

Switching capacity (safe & signal outputs) DC 24 V; Max. 200 mA; short-circuit proof

Minimum load current DC 24 V; 1 mA

Sensing range recommended, maximum. 5 mm, close 10 mm / open 20 mm

Housing material Red PES (polyester)

Degree of protection IP67, IP69K (with M12 connector IP67)

Temperature range -25 ° C to +80 ° C

PL; Kat .; SILCL (EN ISO 13849-1; EN / IEC 62061) PL e; Cat.4

Vibration, shock resistance 10-55 Hz / 1 mm, 1 ms / 30 g

Weight, size 200 g, 36 x 26 x 13 mm