Distribuidor progresivo DP11

Characteristics

• Block design avoiding leaks
• Grease and oil can be used
• high performance
• Progressive and uniform lubrication
• Internal communication of outputs
• Different operating control systems, visual or electrical by micro or proximity detector.
• Robust body in EN 10087-11SMnPb30
• Large greasing capacity, progressive between 6 and 26 outlets.

Description

The progressive distributors are of the piston type, which make a clean and exact distribution of lubricant.

The progressive distributor takes its name from the fact that the supply of lubricant to the greasing points occurs in progressive order.

Design and principle of operation

The lubricant inlet acts on the first plunger causing its movement, which forces the displacement of the following plungers, providing flow through the outlets and causing their progressive and continuous displacement as long as there is a supply of lubricant from the inlet.

This progressive allows, depending on the lubrication points, to cover outlets internally to join them externally and unify lubrication on the outside, avoiding annoying external “T” assemblies.

The blockage of a single piston due to lack of lubricant leads to the blockage of the entire distributor. The solution is simply to add a detection system to a single plunger to control the entire progressive.

Facility

They always need to be installed in a progressive pumping system, whether primary or secondary distribution, the lubricant can be entered from a pressure pump or from another progressive, when it acts as a secondary progressive, proportionally distributing the flow received between the enabled outlets.

Specifications