Helmholz 700-158-3DP01 DP/PN Coupler V1

Codice: 700-158-3DP01

Marchio: Helmholz

With the new DP/PN Coupler, a simple and uncomplicated connection of PROFIBUS to PROFINET is possible. It allows data transfer between a PROFIBUS master and a PROFINET controller. The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data. The DP/PN Coupler is projected via a GSD file on the PROFIBUS side and a GSDML file on the PROFINET side. No additional configuration software is necessary.

General information
	Order number	700-158-3DP01
	Article name	DP/PN Coupler V1
	Scope of delivery	DP/PN Coupler, Quick Start Guide
	Dimensions (DxWxH)	35 mm x 58 mm x 72 mm
	Weight	approx. 135 g
PROFINET interface
	Number	2
	Protocol	PROFINET IO Device as defined in IEC 61158-6-10
	Transmission rate	100 Mbps full duplex
	Connection	2x RJ45, integrated switch
	Features	Media Redundancy Protocol (MRP), automatic addressing, topology detection (LLDP, DCP), diagnosis alarm, conformance class B
PROFIBUS interface
	Protocol	PROFIBUS-DP
	Transmission rate	max. 12 Mbps, autom. detection
	I/O image size	max. 244 bytes of input / 244 bytes of output data
	Connection	9-pin D-sub female connector
Status indicator		9 LEDs function status, 4 LEDs Ethernet status
Voltage supply
	Voltage supply	24 V DC (18 ... 28 V DC)
	Current draw	max. 210 mA
Ambient conditions
	Ambient temperature	0 °C to 60 °C
	Transport and storage temperature	-20 °C to 80 °C
	Protection rating	IP 20
	Certifications	CE
CE
	RoHS	Yes
	REACH	Yes