Helmholz 700-651-CAN01 DP/CAN coupler, manual, CD with software

Codice: 700-651-CAN01

Marchio: Helmholz

On the PROFIBUS-DP, the DP/CAN coupler is a normal participant.
The I/O data of the CANopen® participants is shown in the PROFIBUS in a transparent and freely configurable manner.
The DP/CAN coupler is integrated in the hardware configurator with a GSD file and can be completely configured there. Additional tools are not necessary.

The DP/CAN coupler Layer 2 allows you to connect any number of CAN participants to the PROFIBUS-DP.
The DP/CAN coupler Layer 2 must be parameterized in the hardware configurator as a PROFIBUS participant. Corresponding GSD files are included with the device.
The PROFIBUS side is configured as a DP slave; the interfaces correspond to EN 50170 and are electrically isolated.
The transfer rate from 9.6 kbps to 12 Mbps is automatically detected, and the size of the input and output information amounts to a maximum of 312 bytes.
The CAN bus interface complies with ISO/DIN 11898-2 and is electrically isolated.
The DP/CAN coupler can send and receive any CAN messages. Messages can be defined with a fixed identifier, the data of which is always visible as a peripheral image in PROFIBUS. Alternatively, the DP/CAN coupler Layer 2 has a transmit and receive buffer for any CAN messages.
The DP/CAN coupler Layer 2 also works in the extended ambient temperatures of -25 °C to +70 °C.

General information
	Order number	700-651-CAN01
	Article name	DP/CAN coupler Layer 2
	Scope of delivery	DP/CAN coupler, manual, CD with software
	Dimensions (DxWxH)	114 x 18 x 108 mm
	Weight	Approx. 110 g
PROFIBUS interface
	Number	1
	Protocol	PROFIBUS-DP
	Transmission rate	max. 12 Mbps, autom. detection
	I/O image size	max. 240 bytes of input / 240 bytes of output data
	Connection	SUB-D female connector, 9-pin
CAN interface
	Number	1
	Type	ISO/DIN 11898-2 CAN High-speed physical layer
	Transmission rate	10 kbps ... 1 Mbps
	Protocol	CAN 2.0A (11 bit) / CAN 2.0B (29 bit)
	Connection	Terminal 3-pin
	Features	Cyclical transmission of CAN frames
Status indicator		3 LEDs
Voltage supply		24 V DC, 18–30 V DC
Current draw		typ. 180 mA with DC 24 V
Ambient conditions
	Ambient temperature	-25 °C ... +70°C
	Transport and storage temperature	-40 °C … +75 °C
	Relative air humidity	95 % r H without condensation
	Pollution degree	2
	Protection rating	IP20
	Certifications	CE
CE
	RoHS	Yes
	REACH	Yes