Helmholz 700-158-3DP01 DP/PN Coupler V1

Helmholz 700-158-3DP01 DP/PN Coupler V1

코드: 700-158-3DP01
브랜드: Helmholz

With the new DP/PN Coupler, a simple and uncomplicated connection of PROFIBUS to PROFINET is possible. It allows data transfer between a PROFIBUS master and a PROFINET controller. The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data. The DP/PN Coupler is projected via a GSD file on the PROFIBUS side and a GSDML file on the PROFINET side. No additional configuration software is necessary.

General information
Order number700-158-3DP01
Article nameDP/PN Coupler V1
Scope of deliveryDP/PN Coupler, Quick Start Guide
Dimensions (DxWxH)35 mm x 58 mm x 72 mm
Weightapprox. 135 g
PROFINET interface
Number2
ProtocolPROFINET IO Device as defined in IEC 61158-6-10
Transmission rate100 Mbps full duplex
Connection2x RJ45, integrated switch
FeaturesMedia Redundancy Protocol (MRP), automatic addressing, topology detection (LLDP, DCP), diagnosis alarm, conformance class B
PROFIBUS interface
ProtocolPROFIBUS-DP
Transmission ratemax. 12 Mbps, autom. detection
I/O image sizemax. 244 bytes of input / 244 bytes of output data
Connection9-pin D-sub female connector
Status indicator9 LEDs function status, 4 LEDs Ethernet status
Voltage supply
Voltage supply24 V DC (18 ... 28 V DC)
Current drawmax. 210 mA
Ambient conditions
Ambient temperature0 °C to 60 °C
Transport and storage temperature-20 °C to 80 °C
Protection ratingIP 20
CertificationsCE
CE
RoHSYes
REACHYes


Helmholz 자료 시트

국가 및 언어 파일 이름 다운로드 링크
United States (English) Helmholz-EN_42334.pdf 다운로드

견적 요청