Helmholz 700-751-5VK21 SSW7-RK512, MPI adapter

코드: 700-751-5VK21

브랜드: Helmholz

The SSW7- RK512 transmits data blocks, flags, inputs, and outputs.
The MPI settings of the SSW7-RK512 can be changed by a parameterization program or with special RK512 telegrams to connect several SSW7-RK512 units or several ADs to an MPI bus.
The SSW7-RK512 has automatic baud rate detection on the RS232 interface, which makes it possible to adapt to the connected device (from 9.6 to 115 kbps). The MPI interface operates at 187.5 kbps.
The SSW7-RK512 is supplied with voltage via the MPI bus of the CPU. With an optional 24 V connection, it can be used anywhere else in the system.
We provide the SSW7-RK512 with an additional programming interface on the connector, including a switchable terminating resistor.
The SSW7-RK512 is also available with RS422 interface.
Parameterization and diagnostic functions are possible using the SHTools software.
For a firmware update, download the latest SHTools version for free.

General information
	Order number	700-751-5VK21
	Article name	SSW7-RK512, MPI adapter
	Scope of delivery	SSW7-RK512, manual
	Dimensions (DxWxH)	105 x 53 x 29 mm
	Weight	approx. 180 g
Supply voltage		24 V DC, 18...30 V
Current draw		approx. 70 mA
MPI interface
	Transmission rate	19,2 or 187,5 kbps
	Connection	SUB-D, 9 pin with PG interface and terminating resistor
Communication interface
	Type	RS232
	Transmission rate	19,2...115,2 kbps
	Protocol	RK512 with 3964/r
	Connection	Connector, SUB-D, 9 pin
Protection rating		IP 20