Stego DA 084 | IP55 Pressure Compensation Device

코드: DA 084 | IP55

브랜드: Stego

Mounting	PG 29 thread with union nut
Torque	5Nm
Material	plastic according to UL94 V-0, light grey weather proof and UV light resistant according to UL746C (f1)
Sealing	sealing gasket NBR
Air interface	approx. 1.5cm²
Dimensions	Ø 65.5 x 30.5mm
Fitting position	vertical¹
Operating/Storage temperature	-45 to +70°C (-49 to +158°F)
Approvals	EAC
Note	Material adheres to limit values in accordance with RoHS3

¹ Protection type is restricted to IP54 if fitting position of DA 084 is not vertical.

Installation
Make cut-out Ø 37⁺¹mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.

Art. No.	Protection type	1 packing unit	Weight (approx.)
08400.0-03	IP55	2 pieces	62g (31g/piece)

TECHNICAL DRAWING

Stego 자료 시트

국가 및 언어	파일 이름	다운로드 링크
United States (English)	stego-EN_54310.pdf	다운로드
Deutschland (Deutsch)	stego-DE_71351.pdf	다운로드
Italy (Italiano)	stego-IT_60429.pdf	다운로드