Stego DCR 030 | DC 24V, DC 56V - 200W TO 800W Fan Heater

Stego DCR 030 | DC 24V, DC 56V - 200W TO 800W Fan Heater

코드: DCR 030 | DC 24V, DC 56V - 200W TO 800W
브랜드: Stego
Heating element high performance cartridge
Temperature safety cut-out with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Heater body extruded aluminium profile
Axial fan, ball bearing airflow 160 m³/h, free flow
service life 50,000h at +25 °C (+77 °F)
Connection

2-pole „Push-In“ connection clamp stranded wire1 1.5 mm²
(AWG 16) with strain relief; max. 2.5 mm² (AWG 12)

Casing plastic according to UL94 V-0, black
Mounting screw fixing (M5), torque 2 Nm max., washers have to be used
Fitting position vertical airflow (air outlet up)
Dimensions 166 x 145 x 100 mm
Weight approx. 1.3 kg
Operating temperature -20 to +75 °C (-4 to +167 °F)
Storage temperature -40 to +80 °C (-40 to +176 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Approvals UL File No. E234324, VDE, EAC
Note other versions (heating capacities, setting ranges) as well as operating voltage DC 48 V on request

¹ When connecting with stranded wires, wire end ferrules must be used.

Art. No. Model Operating voltage Heating capacity Recommended
pre-fuse T (time-delay)
Setting range³ temperature / humidity
03092.1-12 Fan heater with integrated thermostat with internal temperature sensor DC 24 V 200 W 25.0 A -20 to +40 °C
03092.1-13 Fan heater with integrated thermostat with
connector for external temperature sensor²
DC 24 V 200 W 25.0 A -20 to +40 °C
03097.3-12 Fan heater with integrated thermostat with
internal temperature sensor
DC 56 V 800 W 25.0 A -20 to +40 °C
03097.3-13 Fan heater with integrated thermostat with
connector for external temperature sensor²
DC 56 V 800 W 25.0 A -20 to +40 °C
03092.1-03 Fan heater with integrated hygrostat with
connector for external humidity sensor²
DC 24 V 200 W 25.0 A 40 to 90 % RH
03095.3-03 Fan heater with integrated hygrostat with
connector for external humidity sensor²
DC 56 V 600 W 25.0 A 40 to 90 % RH

² The external sensor needs to be ordered separately.
³ Switch difference temperature: 3 K (±1 K tolerance) at +25 °C (+77 °F), 50 % RH; switch difference humidity: 4 % RH (±1 % tolerance) at +25 °C (+77 °F), 50 % RH.

ACCESSORIES

The external sensor is not included in the delivery of the DCR 030. It can be ordered separately.

EXTERNAL SENSOR

The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity.

Art. No. Length
267071 1 m
267072 2 m
267126 3 m

TECHNICAL DRAWING

High-performance Fan Heater DCR 030

Stego 자료 시트

국가 및 언어 파일 이름 다운로드 링크
United States (English) stego-EN_54310.pdf 다운로드
Deutschland (Deutsch) stego-DE_71351.pdf 다운로드
Italy (Italiano) stego-IT_60429.pdf 다운로드

견적 요청