Zander Aachen ZLM Safety Rope Switch

Zander Aachen ZLM Safety Rope Switch

Code: ZLM
Brand: Zander Aachen

Safety rope switches immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.

Different variants are available for different rope lengths. An additional emergency stop key can be mounted on both sides of the switches.

With the ZANDER assembly / rope tensioning system ZTK, the pre-tension of the rope can be easily set so that green arrows are visible in the display window of the safety rope switch. This simplifies the assembly, troubleshooting and maintenance procedures.

ApplicationsProtection of large hazardous zones, e.g.
conveyor belts, extrusion plants and cutting machinery
Certified according toIEC 60947-5-5, IEC 60947-5-1, EN 60947-5-5, EN 60947-5-1,
EN 60204-1, ISO 13850
ApprovalsCE, TUV
Safety contacts3 NC / 1 NO
Contact rating, minimum load currentAC-15: 3 A / 240 V; DC 5 V / 10 mA
Typical operating force, rope pulled< 125 N
Rope spans50 m
Ambient temperature-25 °C to +80 °C
HousingDie-Cast, painted yellow
IP RatingIP67
Mechanical reliability1.5 x 10⁶ operations
Approx. weight675 g

Zander Aachen Datasheets

Country & Language File Name Download Link
United States (English) Zander-Aachen-EN_42085.pdf Download

Request a Quote