Helmholz 700-158-3PN01 PN/PN Coupler V1

Código: 700-158-3PN01

Marca: Helmholz

With the PN/PN Coupler, a simple and uncomplicated connection of two separate PROFINET networks is possible. The PN/PN Coupler enables data transmission between two PROFINET controllers. A PROFINET IO device is on both PROFINET network sides. Received input data on one of the network sides is made available as output data to the other network side. The IO data transfer takes place live and as quickly as possible without additional handling blocks.

The maximum size of the transmitted IO data is 1024 bytes. Up to 16 slots for IO modules of 1 byte and up to 128 bytes are available. The incorporation into the PLC engineering tool is made possible by a GSDML file; special configuration software isn’t necessary.

General information
	Order number	700-158-3PN01
	Article name	PN/PN Coupler V1
	Scope of delivery	PN/PN Coupler, Quick Start Guide and CD with GSDML file
	Dimensions (DxWxH)	35 x 58 x 72 mm
	Weight	Approx. 135 g
PROFINET interface
	Number	2 with 2 ports each
	Protocol	PROFINET IO Device as defined in IEC 61158-6-10
	Physical layer	Ethernet
	Transmission rate	100 Mbps full duplex
	I/O image size	max. 1024 bytes
	Connection	4x RJ45
	integrated switch	Yes
	Features	Media redundancy (MRP client), automatic addressing, topology detection (LLDP, DCP), diagnosis alarms, conformance class B
Voltage supply
	Voltage supply	24 V DC (18 - 28 V DC)
	Current draw	max. 210 mA
Ambient conditions
	Ambient temperature	0 °C to 60 °C
	Transport and storage temperature	-20 °C to 80 °C
	Protection rating	IP 20
	Certifications	CE
CE
	RoHS	Yes
	REACH	Yes