Helmholz 700-751-9VK21 SSW7-HMI, MPI adapter with HMI protocol

Código: 700-751-9VK21

Marca: Helmholz

The SSW7-HMI is designed for use with operator terminals, visualizations or other third-party devices that support the HMI protocol from Siemens.

The transfer rate of the adapter is set by the protocol (from 4.8 to 115 kbps).
The SSW7-HMI is supplied with voltage via the MPI bus of the CPU. With an optional 24 V connection, it can be used anywhere else in the system.
We provide the SSW7-HMI with an additional programming interface on the connector, including a switchable terminating resistor.
Parameterization and diagnostic functions are possible using the SHTools software.
For a firmware update, download the latest SHTools version for free.

General information
	Order number	700-751-9VK21
	Article name	SSW7-HMI, MPI adapter with HMI protocol
	Scope of delivery	SSW7-HMI, manual
	Dimensions (DxWxH)	105 x 53 x 29 mm
	Weight	approx. 180 g
Supply voltage		24 V DC, 18...30 V
Current draw		approx. 70 mA
MPI interface
	Type	RS485
	Transmission rate	187,5 kbps
	Connection	SUB-D, 9 pin with PG interface and terminating resistor
Communication interface
	Type	RS232
	Transmission rate	4,8...115,2 kbit/s
	Protocol	HMI
	Connection	Connector, SUB-D, 9 pin
Protection rating		IP 20