Helmholz 700-996-5BA01 FLEXtra® FO 650-5, PROFIBUS Optical Hub, SMA, 650 nm, POF/PCF

Código: 700-996-5BA01

Marca: Helmholz

The FLEXtra® FO enables conversion of electrical MPI/PROFIBUS interfaces into optical MPI/PROFIBUS interfaces.

It reaches PROFIBUS transmission rates from 9.6 kbps to 12 Mbps with automatic transmission rate detection. Due to the optical signal transmission, it offers complete electrical isolation between the PROFIBUS participants and PROFIBUS subnets.
Another advantage of the FLEXtra® FO is its insensitivity to EMC influences.
The transmission signals are converted by the FLEXtra® FO into optical signals and sent across the fiber-optic link. In addition, the signals are regenerated in slope, level, and duty cycle.
It is also suitable for POF** and PCF*- FO.
For the short range up to 65 m, an optical transmission link can be established very quickly and without much effort using the POF**. For longer distances up to 250 m, PCF* FO can be used.
The optical interface of the FLEXtra® FO sends in the visible range (650 nm red light), which allows an initial check of the optical transmission link without expensive instruments.
The FLEXtra® FO features integrated status LEDs for each segment for diagnostic purposes. In this way you are always informed about the state of the bus and the optical interface, and targeted troubleshooting is ensured.
In addition, the FLEXtra® FO has DIP switches for turning off individual or all segments. The segments are separated, but continue to function in themselves.

The FLEXtra® FO 650-5 SMA is a PROFIBUS repeater with an expansion by 5 visual MPI/PROFIBUS segments.

General information
	Order number	700-996-5BA01
	Article name	FLEXtra® FO 650-5, PROFIBUS Optical Hub, SMA, 650 nm, POF/PCF
	Scope of delivery	FLEXtra® FO 650-5, instructions
	Dimensions (DxWxH)	35 x 137 x 72 mm
	Weight	Approx. 250 g
PROFIBUS interface
	Number	1
	Protocol	PROFIBUS-DP
	Transmission rate	9.6 \|19.2 \| 45.45 \| 93.75 \|187.5 \| 500 kbps 1.5 \| 3 \| 6 and 12 Mbps automatic detection
	Connection	SUB-D female connector, 9-pin
Optical interface
	Number	5
	Wavelength	650 nm
	Numerical aperture of the transmitting diode	0.50
	Integrable optical power \| receiver sensitivity POF¹ 980/1000 μm	-7.5 dBm/-20 dBm
	Integrable optical power \| receiver sensitivity PCF¹ 200/230 μm	-18 dBm/-22 dBm
	Overdrive limit of the receiver	-3 dBm
	Bridgeable distance POF¹ 980/1000 µm (160 dB/km)	0 … 65 m
	Bridgeable distance PCF¹ 200/230 µm (10 dB/km)	0 … 250 m
	Connection	SMA
Status indicator		13 LEDs, function status
Input voltage
	Voltage supply	24 V DC, 18–30 V DC
	Electrical isolation	500 V
	Current draw incl. 5V loads	Max. 400 mA
	Current draw incl. 24V loads	Max. 600 mA
Output voltage port X1
	Voltage 1	5 V, max. 150 mA
	Voltage 2	+18 ... +30 V DC, max. 400 mA (as with supply voltage)
	Electrical isolation	500 V
Ambient conditions
	Ambient temperature	0 °C … +60 °C
	Transport and storage temperature	-25 °C … +75 °C
	Pollution degree	2
	Protection rating	IP20
	Certifications	CE
CE
	RoHS	Ja
	REACH	Ja