Stego FZK 011 Mechanical Thermostat

Código: FZK 011

Marca: Stego

Switch temperature difference	5K (-3/+2K tolerance)¹
Sensor element	thermostatic bimetal
Contact type	change-over snap-action contact
Service life	> 100,000 cycles
Min. switching capacity	10mA
Max. switching capacity, NC	250VAC / 120VAC, 10 (4) A DC 30W
Max. switching capacity, NO	250VAC / 120VAC, 5 (2) A DC 30W
Max. inrush current	AC 16A for 10 sec.
Connection	4-pole terminal, clamping torque 0.5Nm max.: rigid/stranded² wire 2.5mm² (AWG 14)
Mounting	clip for 35mm DIN rail, EN 60715
Casing	plastic according to UL94 V-0, light grey
Dimensions	67 x 50 x 38mm
Weight	approx. 0.1kg
Fitting position	variable
Operating/Storage temperature	-45 to +65°C (-49 to +149°F)
Operating/Storage humidity	max. 90% RH (non-condensing)
Protection type	IP20
Approvals	UL File No. E164102, EAC

¹ If the Normally Closed contact is used, the switch temperature difference could be reduced by connecting terminal "N" (RF heating resistor). It causes the thermal feedback which is subject to surrounding conditions and thus has to be determined for each individual application.

² When connecting with stranded wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Art. No.	Operating voltage	Setting range
01170.0-00	230VAC	+5 to +60°C
01170.0-01	230VAC	+40 to +140°F
01170.0-02	230VAC	-20 to +35°C
01170.9-00	120VAC	+40 to +140°F
01170.9-01	120VAC	+5 to +60°C

Stego Datasheets

País e idioma	Nome do arquivo	Link de download
United States (English)	stego-EN_54310.pdf	Download
Deutschland (Deutsch)	stego-DE_71351.pdf	Download
Italy (Italiano)	stego-IT_60429.pdf	Download