DIALOCK® diaphragm valve with flanged monolithic body, drilled PN10/16. Face to face
according to EN 558-1
DIALOCK® 2-WAY DIAPHRAGM VALVE
• Connection system for solvent weld, threaded and flanged joints
• Optimised fluid dynamic design: maximum output flow rate thanks to
the optimised efficiency of the fluid dynamics that characterise the new
internal geometry of the body
• Internal components in metal, totally isolated from the fluid and external
environment
• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet
sizes for 7 different valve sizes
• Non-rising handwheel that stays at the same height during rotation,
equipped with a graduated optical indicator protected by a transparent
PVC cap with seal O-Ring
• Bonnet fastening screws in stainless steel protected against the external
environment by PE plugs. Absence of metal parts exposed to the external
environment to prevent any risk of corrosion
• New flanged bodies: the new bodies, characterised by a monolithic
flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design,
free from body and flange joints, greatly reduces mechanical stress
and increases system performance.
• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the
uniform distribution of shutter pressure on the diaphragm seal, offers the
following advantages:
??reduction in the tightening torque of the screws fixing the actuator to
the valve body
??reduced mechanical stress on all valve components (actuator, body and
diaphragm)
??easy to clean valve interior
??low risk of the accumulation of deposits, contamination or damage to
the diaphragm due to crystallisation
??operating torque reduction
EPDM code
|
FKM code
|
PTFE code
|
DKOF020E
|
DKOF020F
|
DKOF020P
|
DKOF025E
|
DKOF025F
|
DKOF025P
|
DKOF032E
|
DKOF032F
|
DKOF032P
|
DKOF040E
|
DKOF040F
|
DKOF040P
|
DKOF050E
|
DKOF050F
|
DKOF050P
|
DKOF063E
|
DKOF063F
|
DKOF063P
|
DKOF075E
|
DKOF075F
|
DKOF075P
|
Teklif İste