Helmholz 700-752-5VK21 SSW7-RK512, MPI adapter with RS422 interface

Helmholz 700-752-5VK21 SSW7-RK512, MPI adapter with RS422 interface

Kod: 700-752-5VK21
Marka: Helmholz

With the SSW7-RK512 it is possible to bring operator terminals, visualization, or other external devices to the S7 without adapting the software, if they support the RK512 protocol.

The SSW7- RK512 transmits data blocks, flags, inputs, and outputs.
The MPI settings of the SSW7-RK512 can be changed by a parameterization program or with special RK512 telegrams to connect several SSW7-RK512 units or several ADs to an MPI bus.
The SSW7-RK512 has automatic baud rate detection on the RS232 interface, which makes it possible to adapt to the connected device (from 9.6 to 115 kbps). The MPI interface operates at 187.5 kbps.
The SSW7-RK512 is supplied with voltage via the MPI bus of the CPU. With an optional 24 V connection, it can be used anywhere else in the system.
We provide the SSW7-RK512 with an additional programming interface on the connector, including a switchable terminating resistor.
The SSW7-RK512 is also available with RS422 interface.

General information
Order number700-752-5VK21
Article nameSSW7-RK512, MPI adapter with RS422 interface
Scope of deliverySSW7-RK512, manual
Dimensions (DxWxH)105 x 53 x 29 mm
Weightapprox. 180 g
Supply voltage24 V DC, 18...30 V
Current drawapprox. 70 mA
MPI interface
Transmission rate187,5 kbps
ConnectionSUB-D, 9 pin
with PG interface and terminating resistor
Communication interface
TypeRS422
Transmission rate19,2...115,2 kbps
ProtocolRK512 with 3964/r
ConnectionConnector, SUB-D, 9 pin
Protection ratingIP 20



Helmholz Veri Sayfaları

Ülke ve Dil Dosya Adı İndirme Bağlantısı
United States (English) Helmholz-EN_42334.pdf İndir

Teklif İste