Zander Aachen ZLMS Safety Rope Switch

Kod: ZLMS

Marka: Zander Aachen

Safety rope switches immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.

Different variants are available for different rope lengths. An additional emergency stop key can be mounted on both sides of the switches.

With the ZANDER assembly / rope tensioning system ZTK, the pre-tension of the rope can be easily set so that green arrows are visible in the display window of the safety rope switch. This simplifies the assembly, troubleshooting and maintenance procedures.


ZLMS
Applications	Protection of large hazardous zones, e.g. conveyor belts, extrusion plants and cutting machinery
Certified according to	IEC 60947-5-5, IEC 60947-5-1, EN 60947-5-5, EN 60947-5-1, EN 60204-1, ISO 13850
Approvals	CE, TUV
Safety contacts	3 NC / 1 NO
Contact rating, minimum load current	AC-15: 3 A / 240 V; DC 5 V / 10 mA
Typical operating force, rope pulled	< 125 N
Rope spans	50 m
Ambient temperature	-25 °C to +80 °C
LED	DC 24 V Red flashing or steady - unsafe condition Green steady - safe condition
Housing	Stainless Steel
IP Rating	IP67
Mechanical reliability	1.5 x 10⁶ operations
Approx. weight	1460 g