Stego CS 130 | 1,200W Fan Heater

Heating element	PTC resistor - temperature limiting
Temperature safety cut-out	to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing	airflow 160m³/h, free flow
	service life 50,000h at +25°C (+77°F)
Connection	2-pole max. 2.5mm², clamping screw with strain relief,
	torque 0.8Nm max.
Casing	plastic according to UL94 V-0, black
Mounting	clip for 35mm DIN rail, EN 60715 or screw fixing (M6)
Fitting position	vertical airflow (air outlet up)
Dimensions	182 x 168 x 120 mm
Weight	approx. 1.3kg
Operating/Storage temperature	-45 to +70°C (-49 to +158°F)
Operating/Storage humidity	max. 90% RH (non-condensing)
Protection type/Protection class	IP20 / II (double insulated)

Art. No.	Model	Operating voltage	Heating capacity¹	Inrush current max.	Recommended pre-fuse T (time-delay)	Setting range²	Approvals
13060.0-00	Fan Heater with thermostat	230VAC, 50/60Hz	1,200W	13.0A	10.0A	0 to +60°C	VDE	UL File No. E150057³	EAC
13060.0-01	Fan Heater without thermostat	230VAC, 50/60Hz	1,200W	13.0A	10.0A	-	VDE	UL File No. E150057³	EAC
13060.9-00	Fan Heater with thermostat	120VAC, 50/60Hz	1,200W	16.0A	16.0A	+32 to +140°F	-	UL File No. E150057³	EAC
13060.9-01	Fan Heater without thermostat	120VAC, 50/60Hz	1,200W	16.0A	16.0A	-	-	UL File No. E150057³	EAC

¹ at +20°C (+68°F) ambient temperature; ² Switch temperature difference 7K (±4K tolerance); ³ according to UL 508A, NITW File on request

TECHNICAL DRAWING