Stego DCF 010 | DC 20 TO 56 V Electronic Hygrostat

代码: DCF 010 | DC 20 TO 56 V

品牌: Stego

Switch difference (humidity)	4 % RH (±1 % tolerance) at +25 °C (+77 °F), 50 % RH
Reaction time	approx. 5 sec.
External sensor	cable 2 m with snap in connector (included in the delivery)
Contact type	contact maker NO (MOSFET) or contact breaker NC (MOSFET)
Service life	> 100,000 cycles
Operating voltage	DC 20 to 56 V
Optical indicator	LED
Connection	6-pole terminal: stranded wire1 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12)
Mounting	clip for 35 mm DIN rail, EN 60715
Casing	plastic according to UL94 V-0, grey (bicolor)
Dimensions	93 x 53 x 44 mm
Weight	approx. 120 g (incl. sensor)
Fitting position	vertical
Storage temperature	-40 to +80 °C (-40 to +176 °F)
Operating/Storage humidity	max. 90 % RH (non-condensing)
Protection type	IP20
Approvals	UL File No. E164102, VDE, EAC
Note	other versions on request

1 When connecting with stranded wires, wire end ferrules must be used.

Art. No.	Max. switching capacity	Operating temperature	Primary switching function - setting range humidity	Secondary switching function² - Switch-on temperature	Contact (primary)
01012.0-20	DC 15 A	-30 °C to +40 °C (-22 °F to +104 °F)	40 to 90 % RH	+5 °C (+41 °F) pre-set	Contact maker (NO)
01012.0-21	DC 13 A	-30 °C to +50 °C (-22 °F to +122 °F)	40 to 90 % RH	+5 °C (+41 °F) pre-set	Contact maker (NO)
01012.0-22	DC 11 A	-30 °C to +60 °C (-22 °F to +140 °F)	40 to 90 % RH	+5 °C (+41 °F) pre-set	Contact maker (NO)

² Versions with secondary switching function can also register the temperature and therefore offer an additional protection for electronics.
Switch difference: 3 K (±1 K tolerance) at +25 °C (+77 °F), 50 % RH.

TECHNICAL DRAWING

Stego 资料表

国家与语言	文件名	下载链接
United States (English)	stego-EN_54310.pdf	下载
Deutschland (Deutsch)	stego-DE_71351.pdf	下载
Italy (Italiano)	stego-IT_60429.pdf	下载