Unimec RC 350 Bevel Gearbox

الكود: RC 350

العلامة التجارية: Unimec

Materials

	Material	Normative	Specification	Indications
Hollow shaft	16NiCr4	EN 10084:2008	Alloy cementation steel	Cemented and ground on internal and external diameters
Hub shaft	C45	EN 10083-2:2006	Carbon steel
Carter	GJL 250	EN 1561:2011	Grey cast iron	Completely machined on 6 faces
Bevel gears	17NiCrMo 6-4	EN 10084:2008	Casehardening alloy steel	Ground bores and planes. Gleason gears run by pair.
Lubricant	Unimec Atir SH150		Synthetic oil	11 lt

General features

Gear backlash	15' - 20'
Forced lubrication speed	600 rpm
Grease lubrication speed	100 rpm
Operating temperature [°C]	-10 °C / 80 °C
Hollow shaft maximum moment	12000 Nm
Maximum input speed	750 rpm
Main gearbox weight	175 kg

Specific features

	Nominal ratios
	1/1	1/1,5	1/2	1/3	1/4
Phase between keys	+/- 4°	+/- 4°	+/- 4°	+/- 3,5°	+/- 3,5°
Inertia moment	755300 kg-mm²	261700 kg-mm²	139200 kg-mm²	61600 kg-mm²	35200 kg-mm²

Power curves

The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
S = Rotational speed of the fast/slow shaft [rpm]
CL = Slow shaft torque [Nm]
P = requested input power [kW]

Max admissible loads

Admissible loads
S = Fast shaft rotational speed [rpm]
RL = Admissible radial load [kN]
AL = Admissible axial load [kN]
HS = Hub shaft
RHS = reinforced hub shaft
PS = Solid protruding shaft

Unimec ورقات البيانات

البلد واللغة	اسم الملف	رابط التحميل
United States (English)	Unimec-EN_59050.pdf	تحميل
Deutschland (Deutsch)	Unimec-DE_13807.pdf	تحميل
Italy (Italiano)	Unimec-IT_75906.pdf	تحميل
中国（简体	Unimec-CN_95426.pdf	تحميل