Unimec XTP 306 Stainless Steel Trapezoidal Screw Jack

Unimec XTP 306 Stainless Steel Trapezoidal Screw Jack

Code: XTP 306
Brand: Unimec

Materials

Material Normative Specification Indications
Worm 16NiCr4 EN 10084:2008 Casehardening alloy steel Casehardened and ground on teeth and holds
Worn wheel CuAl10Fe2-GM EN 1982:2008 Alluminium bronze Chill molded
Threaded spindle X5 CrNiMo 17-12-2 (AISI 316) EN 10088-1:2014 Stainless steel Tr 30x6 (ISO 2901:2016) cutting
Carter X5 CrNiMo 17-12-2 (AISI 316) EN 10088-1:2014 Stainless steel Completely machined on 6 faces
Lubricant Unimec Mark CA Calcium based grease 0,3 kg

General features

Operating temperature [°C] -10 °C / 80 °C
Static load (traction or compression) 40 kN
Dynamic load (traction or compression) 25 kN
Maximum input speed 1800 rpm
Main gearbox weight 10 kg
Trapezoidal screw weight 5 kg/m
Anti-rotation torque at maximum load 63 Nm
Maximum admissible static lateral loads 0 N
Center-to-center diameter 50 mm
Maximum radial load on worm 450 N
Standard working conditions 25 °C - servizio 10%

Specific features

Nominal ratios
1/5 1/10 1/30
Real ratio 1/4,75 1/9,67 1/30
Translation per worm revolution 1,26 mm 0,62 mm 0,2 mm
Efficiency 30 % 26 % 18 %
Start-up efficiency 21 % 18 % 13 %
Maximum linear speed 2160 1080 360
Torque at maximum load 16 Nm 9,3 Nm 4,4 Nm
Worm screw maximum torque 69 Nm 154 Nm 183 Nm
Idle torque 0,4 Nm 0,3 Nm 0,25 Nm

Euler's law (safety factor =2; dynamic compression load)
Limit Load 1 (red) - 2 (blue) - 3 (green)
C = Load [kN]
L = Overall trapezoidal screw length [mm]

Power curves

The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
VR = Worm rotational speed [rpm]
VL = Spindle translation speed [mm/min]
P = Requested input power [kW]

Unimec Datasheets

Country & Language File Name Download Link
United States (English) Unimec-EN_59050.pdf Download
Deutschland (Deutsch) Unimec-DE_13807.pdf Download
Italy (Italiano) Unimec-IT_75906.pdf Download
中国(简体 Unimec-CN_95426.pdf Download

Request a Quote