Helmholz 700-972-1XA02 FLEXtra® profiPoint set

Helmholz 700-972-1XA02 FLEXtra® profiPoint set

코드: 700-972-1XA02
브랜드: Helmholz

It can be used in conjunction with a PROFIBUS connector as the active measurement point or as an active terminator. Power is supplied independent of the bus through a socket.
Through the use of an active terminating resistor, participants of the bus system can optionally be switched on and off without causing malfunctions.
An integrated LED allows the correct function of the profiPoint to be read. For connection to the PROFIBUS cable, a PROFIBUS connector is required.

This set contains the PROFIBUS connector, 90° diagnosis with PG interface with the proven screw terminal required for connection to the PROFIBUS cable.

General information
Order number700-972-1XA02
Article nameFLEXtra® profiPoint set
Scope of deliveryFLEXtra® profiPoint, instructions, 1x PROFIBUS connector, 90°, screw terminal, diagnostics, with PG
Dimensions (DxWxH)35 x 32 x 72 mm
WeightApprox. 85 g
Segment connectionPROFIBUS connectors
Voltage supply24 V DC, 18...30 V DC
Output voltage per segmentDC 24 V/5 V DC
Electrical isolation500 V
Current drawMax. 400 mA
Ambient conditions
Ambient temperature0 °C … +60 °C
Transport and storage temperature-25 °C … +75 °C
Pollution degree2
Protection ratingIP20
CertificationsCE
CE
RoHSYes
REACHYes

Helmholz 자료 시트

국가 및 언어 파일 이름 다운로드 링크
United States (English) Helmholz-EN_42334.pdf 다운로드

견적 요청