Unimec Order Code : TP306 MBD R1/10 C.420 TOC Trapezoidal Screw Jacks

Unimec Order Code : TP306 MBD R1/10 C.420 TOC Trapezoidal Screw Jacks

코드: TP306 MBD R1/10 C.420 TOC
브랜드: Unimec

Materials

Material Normative Specification Indications
Worm 16NiCr4 EN 10084:2008 Casehardening alloy steel Casehardened and ground on teeth and holds
Worn wheel CuAl10Fe2-GM EN 1982:2008 Alluminium bronze Chill molded
Threaded spindle C45 EN 10083-2:2006 Carbon steel Tr 30x6 (ISO 2901:2016) - Rolled or machined
Carter GJL 250 EN 1561:2011 Grey cast iron Completely machined on 6 faces
Lubricant Unimec Mark CA Calcium based grease 0,3 kg

General features

Operating temperature [°C] -10 °C / 80 °C
Static load (traction or compression) 40 kN
Dynamic load (traction or compression) 25 kN
Maximum input speed 1800 rpm
Main gearbox weight 10 kg
Trapezoidal screw weight 5 kg/m
Anti-rotation torque at maximum load 63 Nm
Maximum admissible static lateral loads 0 N
Center-to-center diameter 50 mm
Maximum radial load on worm 450 N
Standard working conditions 25 °C - servizio 10%

Specific features

Nominal ratios
1/5 1/10 1/30
Real ratio 1/4,75 1/9,67 1/30
Translation per worm revolution 1,26 mm 0,62 mm 0,2 mm
Efficiency 30 % 26 % 18 %
Start-up efficiency 21 % 18 % 13 %
Maximum linear speed 2160 1080 360
Torque at maximum load 16 Nm 9,3 Nm 4,4 Nm
Worm screw maximum torque 69 Nm 154 Nm 183 Nm
Idle torque 0,4 Nm 0,3 Nm 0,25 Nm

Unimec 자료 시트

국가 및 언어 파일 이름 다운로드 링크
United States (English) Unimec-EN_59050.pdf 다운로드
Deutschland (Deutsch) Unimec-DE_13807.pdf 다운로드
Italy (Italiano) Unimec-IT_75906.pdf 다운로드
中国(简体 Unimec-CN_95426.pdf 다운로드

견적 요청