Helmholz 700-670-PNC01 PN/CAN gateway, Quick Start Guide, CD with GSDML file and manual

Código: 700-670-PNC01

Marca: Helmholz

On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transfer rates up to 100 Mbps full duplex; and up to 1 Mbps on the CAN bus.
The I/O data of the CAN participants is transparently displayed in a freely configurable manner on the PROFINET network and can thus be processed directly in the PLC. The PN/CAN gateway is integrated with a GSDML file in the hardware configurator and can be fully configured there. No other software tools for configuration or handling blocks for programming are necessary, making gateway use straightforward.
The features of the PN/CAN gateway are rounded out by MRP (media redundancy), as well as extensive diagnostic functions and an interface for online diagnostics.

The PN/CAN gateway CANopen represents a full-fledged CANopen master. As the master, it supports gateway network management, SYNC telegrams and node guarding/heartbeat for monitoring the participants and LSS services. Up to 16 PDOs can be configured for each CANopen® slave. It is also possible to configure the CANopen participants using SDO frames and to administer emergency messages.

General information
	Order number	700-670-PNC01
	Article name	PN/CAN gateway, PROFINET/CANopen
	Scope of delivery	PN/CAN gateway, Quick Start Guide, CD with GSDML file and manual
	Dimensions (DxWxH)	35 x 84 x 76 mm
	Weight	Approx. 160 g
PROFINET interface
	Number	1
	Protocol	PROFINET IO as defined in IEC 61158-6-10
	Physical layer	Ethernet
	Transmission rate	100 Mbps
	I/O image size	max. 1440 bytes of input / 1440 bytes of output data
	Connection	RJ45 socket
	Features	Media Redundancy Protocol (MRP), automatic addressing / topology detection (LLDP, DCP)
CAN interface
	Number	1
	Type	ISO/DIN 11898-2 CAN High-speed physical layer
	Transmission rate	50, 100, 125, 250, 500, 800, 1000 kbps
	Protocol	CANopen® master as defined in DSP301 V4.2
	Connection	9-pin D-sub male connector
	TPDOs	16 per slave
	RPDOs	16 per slave
	Features	Up to 126 slaves, Heartbeat, Nodeguarding, Sync
USB interface
	Protocol	Full-speed USB 2.0 device
	Connection	Mini-USB
	Isolation voltage	1.5 kV
	Electrical isolation	Yes
Status indicator		3 LEDs, function status 4 LEDs, Ethernet status
Voltage supply		24 V DC, 18–30 V DC
Current draw		Max. 250 mA with 24 V DC
Ambient conditions
	Ambient temperature	0 °C ... +60°C
	Transport and storage temperature	-20 °C … +80 °C
	Relative air humidity	95 % r H without condensation
	Pollution degree	2
	Protection rating	IP20
	Certifications	CE
CE
	RoHS	Yes
	REACH	Yes