Stego DCT 010 | DC 20 TO 56 V Electronic Thermostat

Código: DCT 010 | DC 20 TO 56 V

Marca: Stego

Switch difference (temperature)	3 K (±1 K tolerance) at +25 °C (+77 °F), 50 % RH
Reaction time	approx. 5 sec.
External sensor	cable 2 m with snap in connector (included in the delivery)
Contact type	contact maker NO (MOSFET) or contact breaker NC (MOSFET)
Service life	> 100,000 cycles
Operating voltage	DC 20 to 56 V
Optical indicator	LED
Connection	6-pole terminal: stranded wire1 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12)
Mounting	clip for 35 mm DIN rail, EN 60715
Casing	plastic according to UL94 V-0, grey (bicolor)
Dimensions	93 x 53 x 44 mm
Weight	approx. 120 g (incl. sensor)
Fitting position	vertical
Storage temperature	-40 to +80 °C (-40 to +176 °F)
Operating/Storage humidity	max. 90 % RH (non-condensing)
Protection type	IP20
Approvals	UL File No. E164102, VDE, EAC
Note	other versions (e.g. setting ranges and °F) on request

1 When connecting with stranded wires, wire end ferrules must be used.

Art. No.	Max. switching capacity	Operating temperature	Primary switching function - setting range temperature	Secondary switching function² - humidity setting	Contact (primary)
01011.0-21	DC 13 A	-30 °C to +50 °C (-22 °F to +122 °F)	-10 to +50 °C	-	Contact maker (NO)
01011.0-22	DC 11 A	-30 °C to +60 °C (-22 °F to +140 °F)	0 to +60 °C	-	Contact maker (NO)
01011.0-41	DC 13 A	-30 °C to +50 °C (-22 °F to +122 °F)	-10 to +50 °C	65 % RH pre-set	Contact breaker (NC)
01011.0-42	DC 11 A	-30 °C to +60 °C (-22 °F to +140 °F)	0 to +60 °C	65 % RH pre-set	Contact breaker (NC)

² Versions with secondary switching function can also register the humidity and therefore offer an additional protection for electronics.
Switch difference: 4 % RH (±1 % tolerance) at +25 °C (+77 °F), 50 % RH.

TECHNICAL DRAWING

Stego Datasheets

País e idioma	Nome do arquivo	Link de download
United States (English)	stego-EN_54310.pdf	Download
Deutschland (Deutsch)	stego-DE_71351.pdf	Download
Italy (Italiano)	stego-IT_60429.pdf	Download