Helmholz 700-670-PNC01 PN/CAN gateway, Quick Start Guide, CD with GSDML file and manual

Helmholz 700-670-PNC01 PN/CAN gateway, Quick Start Guide, CD with GSDML file and manual

Kod: 700-670-PNC01
Marka: Helmholz

On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transfer rates up to 100 Mbps full duplex; and up to 1 Mbps on the CAN bus.
The I/O data of the CAN participants is transparently displayed in a freely configurable manner on the PROFINET network and can thus be processed directly in the PLC. The PN/CAN gateway is integrated with a GSDML file in the hardware configurator and can be fully configured there. No other software tools for configuration or handling blocks for programming are necessary, making gateway use straightforward.
The features of the PN/CAN gateway are rounded out by MRP (media redundancy), as well as extensive diagnostic functions and an interface for online diagnostics.

The PN/CAN gateway CANopen represents a full-fledged CANopen master. As the master, it supports gateway network management, SYNC telegrams and node guarding/heartbeat for monitoring the participants and LSS services. Up to 16 PDOs can be configured for each CANopen® slave. It is also possible to configure the CANopen participants using SDO frames and to administer emergency messages.


General information
Order number700-670-PNC01
Article namePN/CAN gateway, PROFINET/CANopen
Scope of deliveryPN/CAN gateway, Quick Start Guide, CD with GSDML file and manual
Dimensions (DxWxH)35 x 84 x 76 mm
WeightApprox. 160 g
PROFINET interface
Number1
ProtocolPROFINET IO as defined in IEC 61158-6-10
Physical layerEthernet
Transmission rate100 Mbps
I/O image sizemax. 1440 bytes of input / 1440 bytes of output data
ConnectionRJ45 socket
FeaturesMedia Redundancy Protocol (MRP), automatic addressing / topology detection (LLDP, DCP)
CAN interface
Number1
TypeISO/DIN 11898-2 CAN High-speed physical layer
Transmission rate50, 100, 125, 250, 500, 800, 1000 kbps
ProtocolCANopen® master as defined in DSP301 V4.2
Connection9-pin D-sub male connector
TPDOs16 per slave
RPDOs16 per slave
FeaturesUp to 126 slaves, Heartbeat, Nodeguarding, Sync
USB interface
ProtocolFull-speed USB 2.0 device
ConnectionMini-USB
Isolation voltage1.5 kV
Electrical isolationYes
Status indicator3 LEDs, function status
4 LEDs, Ethernet status
Voltage supply24 V DC, 18–30 V DC
Current drawMax. 250 mA with 24 V DC
Ambient conditions
Ambient temperature0 °C ... +60°C
Transport and storage temperature-20 °C … +80 °C
Relative air humidity95 % r H without condensation
Pollution degree2
Protection ratingIP20
CertificationsCE
CE
RoHSYes
REACHYes

Helmholz Veri Sayfaları

Ülke ve Dil Dosya Adı İndirme Bağlantısı
United States (English) Helmholz-EN_42334.pdf İndir

Teklif İste