Kod: TPR-00306
Marka: Unimec
Materials
|
Material |
Normative |
Specification |
Indications |
Worm |
16NiCr4 |
EN 10084:2008 |
Casehardening alloy steel |
Casehardened and ground on teeth and holds |
Worn wheel |
CuAl10Fe2-GM |
EN 1982:2008 |
Alluminium bronze |
Chill molded |
Nut |
CuAl10Fe2-GM |
EN 1982:2008 |
Alluminium bronze |
Chill molded |
Threaded spindle |
C45 |
EN 10083-2:2006 |
Carbon steel |
Tr 30x6 (ISO 2901:2016) - Rolled or machined |
Carter |
GJL 250 |
EN 1561:2011 |
Grey cast iron |
Completely machined on 6 faces |
Lubricant |
Unimec Mark CA |
|
Calcium based grease |
0,3 kg |
General features
Operating temperature [°C] |
-10 °C / 80 °C |
Static load (traction or compression) |
40 kN |
Dynamic load (traction or compression) |
25 kN |
Maximum input speed |
1800 rpm |
Main gearbox weight |
10 kg |
Trapezoidal screw weight |
5 kg/m |
Anti-rotation torque at maximum load |
63 Nm |
Maximum admissible static lateral loads |
0 N |
Center-to-center diameter |
50 mm |
Maximum radial load on worm |
450 N |
Standard working conditions |
25 °C - servizio 10% |
Specific features
|
Nominal ratios |
|
1/5 |
1/10 |
1/30 |
Real ratio |
1/4,75 |
1/9,67 |
1/30 |
Translation per worm revolution |
1,26 mm |
0,62 mm |
0,2 mm |
Efficiency |
30 % |
26 % |
18 % |
Start-up efficiency |
21 % |
18 % |
13 % |
Maximum linear speed |
2160 |
1080 |
360 |
Torque at maximum load |
16 Nm |
9,3 Nm |
4,4 Nm |
Worm screw maximum torque |
69 Nm |
154 Nm |
183 Nm |
Idle torque |
0,4 Nm |
0,3 Nm |
0,25 Nm |
Teklif İste