Unimec XTPR 306 Stainless Steel Trapezoidal Screw Jack

代码: XTPR 306

品牌: Unimec

Materials

	Material	Normative	Specification	Indications
Worm	16NiCr4	EN 10084:2008	Casehardening alloy steel	Casehardened and ground on teeth and holds
Worn wheel	CuAl10Fe2-GM	EN 1982:2008	Alluminium bronze	Chill molded
Nut	CuAl10Fe2-GM	EN 1982:2008	Alluminium bronze	Chill molded
Threaded spindle	X5 CrNiMo 17-12-2 (AISI 316)	EN 10088-1:2014	Stainless steel	Tr 30x6 (ISO 2901:2016) cutting
Carter	X5 CrNiMo 17-12-2 (AISI 316)	EN 10088-1:2014	Stainless steel	Completely machined on 6 faces
Lubricant	Unimec Mark CA		Calcium based grease	0,3 kg

General features

Operating temperature [°C]	-10 °C / 80 °C
Static load (traction or compression)	40 kN
Dynamic load (traction or compression)	25 kN
Maximum input speed	1800 rpm
Main gearbox weight	10 kg
Trapezoidal screw weight	5 kg/m
Anti-rotation torque at maximum load	63 Nm
Maximum admissible static lateral loads	0 N
Center-to-center diameter	50 mm
Maximum radial load on worm	450 N
Standard working conditions	25 °C - servizio 10%

Specific features

	Nominal ratios
	1/5	1/10	1/30
Real ratio	1/4,75	1/9,67	1/30
Translation per worm revolution	1,26 mm	0,62 mm	0,2 mm
Efficiency	30 %	26 %	18 %
Start-up efficiency	21 %	18 %	13 %
Maximum linear speed	2160	1080	360
Torque at maximum load	16 Nm	9,3 Nm	4,4 Nm
Worm screw maximum torque	69 Nm	154 Nm	183 Nm
Idle torque	0,4 Nm	0,3 Nm	0,25 Nm

Euler's law (safety factor =2; dynamic compression load)
Limit Load 1 (red) - 2 (blue) - 3 (green)
C = Load [kN]
L = Overall trapezoidal screw length [mm]

Power curves

The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
VR = Worm rotational speed [rpm]
VL = Spindle translation speed [mm/min]
P = Requested input power [kW]

Unimec 资料表

国家与语言	文件名	下载链接
United States (English)	Unimec-EN_59050.pdf	下载
Deutschland (Deutsch)	Unimec-DE_13807.pdf	下载
Italy (Italiano)	Unimec-IT_75906.pdf	下载
中国（简体	Unimec-CN_95426.pdf	下载