| Trasducer input voltage: 5 Vcc (max 16 load cells 350 Ohm, in total) |
| Measuring range: -3.9 mV/V ÷ +3.9 mV/V |
| Input sensitivity: 0.02 µV min |
| Output linearity: < 0.01% FS |
| Gain drift: < 0.0003% FS / °C |
| A/D Converter: 24 bit |
| Internal Resolution: > than 8.000,000 divisions |
| Frequency signal acquisition: 25 ÷ 400 Hz (4 load cells) |
| Filter: Selectable from 0.25 Hz to 25 Hz |
| Power supply: 12-24 Vcc ± 15% - absorbed power 3 W |
| Isolation: Class III |
| Installation category: Cat. II |
| Temperature range: -10 / +50 °C (max humidity 85% without mist) |
| Storage temperature: -20 / +60 °C |
| Serial port: 1 USB device + 1 RS232C + 1 RS485 |
| Available fieldbusses: ETHERNET 10/100 (with TCP, MODUBUS/TCP,UDP, IP, ICMP, ARP protocols); PROFIBUS DP; PROFINET; ETHERNET/IP; ETHERCAT; CANOPEN |
| Microcontroller: 32 bit ARM Cortex M0+, 128KB Flash reprogrammable on- board from USB |
| Data storage: 4 Kbytes |
| Regulatory compliance: EN61000-6-2, EN61000-6-3 per EMC; EN61010-1 for electrical safety |
| Electrical connection: Removable screw terminal, 3.81 mm pitch |
| Dimensions: 98 x 90 x 40 mm (L x H x P) |
| Mounting type: Fixing with 4 screws or on support for DIN bar or OMEGA bar |
France (Français)
Deutschland (Deutsch)
United Kingdom (English)
Brasil (Português)
Türkiye (Türkçe)
Italy (Italiano)
España (Español)
العربية (البحرين)
中文
한국인
United States (English)
Demande de devis